The guide pin is used to mount and locate PCBA on ICT Test Fixtures. Using an odd number of guide pins ensures the PCBA is mounted in the correct orientation and positioned precisely over the Test Probes. The Spring Loaded Tooling Pin be used in place of a stripper plate to keep the UUT up off the probes prior to closing the fixture lid. The spring-loaded pins compress as the top lid is closed and the board is pressed onto the probes.
Another application is to install the assembly in the top fixture cover above a push button switch. This allows the operator to access the switch during test without touching the board.
The guide pin is used to mount and locate PCBA on ICT Test Fixtures. Using an odd number of guide pins ensures the PCBA is mounted in the correct orientation and positioned precisely over the Test Probes. The Spring Loaded Tooling Pin be used in place of a stripper plate to keep the UUT up off the probes prior to closing the fixture lid. The spring-loaded pins compress as the top lid is closed and the board is pressed onto the probes.
Another application is to install the assembly in the top fixture cover above a push button switch. This allows the operator to access the switch during test without touching the board.
Barrel Diameter: 6.35mm
Pin Diameter Straight: 4.72mm (Straight) or 4.72mm/3.18 (Stepped)
Tip Type: Flat, Stepped, Point
Delivery: Stock items despatched within 1 to 2 days from date of Order
Non Stock Items despatched approximately 2 weeks from date of order
